HVAC protection · Coverad product range

Air-conditioning unit covers

Made-to-measure steel enclosures that protect air-conditioning equipment in public and commercial interiors while respecting access and airflow requirements.

Commercial interiors · schools · public buildings

Request a Quote Book a Site SurveyNBS listing ↓
1.5Steel constructionRALColour matchedAIRAirflow plannedSECSecure options
Black made-to-measure air-conditioning unit cover
Best suited toPublic and commercial interiors

Commercial interiors · schools · public buildings

Discreet protection for air-conditioning units.

A fully bespoke steel enclosure can protect exposed air-conditioning equipment and improve the room appearance while preserving the unit’s required airflow and service access.

01Protects exposed equipment in high-traffic locations02Ventilation arranged around the selected unit03Access doors or removable panels can support maintenance04Standard, secure and colour-matched configurations
Fast project help. Send a schedule, drawing, photograph or sketch and Coverad can advise on dimensions, access, finish and fixing approach.
Black Coverad air-conditioning enclosure in an interior

At a glance

The selection points teams ask for first.

A concise starting point before the full specification, current datasheet and project drawings are confirmed.

1.5

Steel construction

1.5 mm standard with a 2 mm option.

RAL

Colour matched

Anti-microbial powder-coated finish with RAL colour options.

AIR

Airflow planned

Ventilation arranged around the equipment.

SEC

Secure options

Access and fixing strategies for public settings.

Equipment coordination

The unit determines the enclosure.

Manufacturer clearances, airflow, service zones and controls must be known before the cover dimensions and ventilation pattern are approved.

UNIT

Equipment model

Confirm the exact manufacturer, model and installed position.

AIR

Airflow route

Coordinate free-air area, inlet, discharge and operating clearances.

OPEN

Maintenance access

Select doors or removable panels around the service plan.

SEC

Public-setting details

Review square or sloping profiles, material, fixings and security options.

Detailed view of a steel air-conditioning unit cover

Why this range exists

Built for real-world public interiors.

Ventilation, access doors, mounting and clearances must be coordinated with the selected equipment. Secure variants, alternative materials and any RAL colour support a wide range of interiors.

  1. 01

    Confirm the equipment

    Provide the exact unit model and manufacturer clearances.

  2. 02

    Plan airflow

    Coordinate slot area and free-air requirements.

  3. 03

    Plan maintenance

    Agree doors, panels and service zones.

  4. 04

    Set the finish

    Choose profile, material, colour and security level.

Equipment information

Designed around the unit you are using.

Coverad can review enclosures for equipment from manufacturers such as Mitsubishi, Toshiba, Samsung and Daikin. Send the exact make and model, installation instructions and site photographs so airflow, servicing and clearance requirements can be checked for that specific unit.

Product and project gallery

Product details and real-world installation views across healthcare, education and public-building environments.

Black air-conditioning unit cover
Air-con cover ventilation and finish detail
Made-to-measure air-conditioning enclosure installed indoors

Compare ranges

Is Air-Con Covers the right route?

Compare the closest alternatives by environment and access need, then ask Coverad to confirm the project-specific choice.

Current range

Air-Con Covers

Public and commercial interiors

  • Made to measure
  • RAL colour options
  • Secure options available
Alternative

Standard Steel

Durable everyday LST protection

  • Made to measure
  • Powder-coated steel
  • Floor or wall mounted
Explore Standard Steel
Alternative

Pipe Boxing

Wet areas, corridors and service runs

  • Moisture resistant
  • No painting
  • Standard and bespoke profiles
Explore Pipe Boxing
Alternative

Coverwall

Cleanable, impact-prone surfaces

  • Hygienic surface
  • Impact resistant
  • Trims and accessories
Explore Coverwall

Verified specification route

Air-Con Covers on NBS Source.

Confirm the verified product listing, then open the live specification tools only when they are needed.

Open full NBS profile
View the live NBS specificationProduct data, verification and add-to-spec tools

Specification

Air-conditioning unit covers — key details.

Use this as a quick reference for schedules and tenders. Confirm the current datasheet, drawings, finish, access and fixing details before specification or order.

Download Current Datasheet
RangeCoverad air-conditioning unit covers
Primary materialMild steel
Typical thickness1.5 mm; 2 mm option
Material optionsMagnelis or stainless steel
VentilationArranged around the specific unit airflow requirements
FinishAnti-microbial powder-coated finish; RAL 9010 standard, other RAL colours available. Request coating performance information and cleaning guidance.
MountingFloor or wall mounted
ProfileFlat or 30° sloping
SizesFully bespoke
AccessDoors or removable panels available
Fixing approachSelected for the substrate
Security variantsAnti-ligature and anti-vandal configurations available where required
Project note: product suitability, current test evidence, certification, LST performance, airflow and risk-related details must be confirmed for the specific application.

Selection and specification

Air-conditioning covers: airflow and servicing first

An air-conditioning unit cover must be designed around the specific unit and its installation. Supply the make, model and manufacturer guidance before agreeing the casing dimensions, ventilation and access arrangement.

The on-page viewer illustrates finish and slot-orientation choices. It does not calculate cooling performance, clearance requirements or a final manufacturing size; those need to be confirmed for the selected unit.

Supporting information: Read the Air-Con Covers datasheet. Ask Coverad about your specification.

Information needed for an air-con cover

  • Provide the unit make, model and manufacturer clearance requirements.
  • Identify air intake and discharge positions, drains, controls and service panels.
  • Record the mounting position, nearby obstacles and the space required for maintenance.

Request a site survey if you need help recording site conditions.

Finish information

Anti-microbial powder coating.

The anti-microbial powder-coated finish incorporates silver-ion technology to inhibit bacterial growth on the coated surface. Coating technical literature references testing to ISO 22196:2011 against certain bacterial strains.

This evidence relates to the coating, rather than a test of the complete radiator cover or an infection-prevention claim. Routine cleaning remains necessary. Ask us for the coating performance information and cleaning guidance when developing your specification.

Guidance and project proof

Air-Con Covers guidance and insights.

Relevant specification guidance and live Coverad project stories from the Coverad insights library.

Frequently asked questions

What specification teams usually ask.

Practical checks to make before the current datasheet, drawings and project requirements are confirmed.

Will the cover allow the unit to operate correctly?

The enclosure must be designed around the equipment manufacturer’s airflow and maintenance requirements.

Can the enclosure match an interior colour scheme?

Yes. Alternative RAL colours can be requested.

Can I configure an air-conditioning cover in 3D?

Yes. Explore dimensions, steel, finish and mounting in the online configurator. Confirm the equipment model, airflow clearances and access requirements before manufacture.

What information should I send for a quotation?

Include the unit make and model, dimensions, site photographs and the equipment manufacturer’s installation and maintenance requirements.